全國服務熱線:

                          18396804865 錢經理

                          按需定制便攜式數控切割機/廠家直銷

                          2019-11-19 17:20:07文章來源:www.labobinedelisette.com802

                          在便攜式數控切割機在開展激光切割工作中的那時候,倘若有仔細觀查過,堅信大伙兒也可以或多或少的看得出,手持式激光切割機的激光切割速度效果之間有著深切的聯系,所以大家以后再使用便攜式數控切割機的時候,不要認為切割速度與切割效果之間并沒有什么相關性。

                          At that time when the portable CNC cutting machine was carrying out laser cutting work, if you have looked carefully, you firmly believe that we can see more or less that there is a deep connection between the laser cutting speed effect of the handheld laser cutting machine, so when you use the portable CNC cutting machine in the future, do not think that there is no relationship between the cutting speed and the cutting effect. What relevance.

                          在金屬加工中,許多金屬材料,不管它是什么樣的硬度,都可以使用便攜式數控切割機進行切割。便攜式數控切割機激光切割過程中添加與被切材料相適合的輔助汽體。鋼切割時利用氧作為輔助汽體與熔融金屬產生放熱化學反應氧化材料,同時幫助吹走割縫內的熔渣。切割聚丙烯一類塑料使用壓縮空氣,棉、紙等易燃材料切割使用惰性汽體。進入噴嘴的輔助汽體還能冷卻聚焦透鏡,防止煙塵進入透鏡座內污染鏡片并導致鏡片過熱。

                          In metal processing, many metal materials, no matter what kind of hardness it is, can be cut by portable CNC cutting machine. In the laser cutting process of the portable numerical control cutting machine, the auxiliary steam body suitable for the material to be cut is added. During steel cutting, oxygen is used as the auxiliary material to generate exothermic chemical reaction oxidation between steam and molten metal, and at the same time, it helps blow away the slag in the slit. For cutting polypropylene, compressed air is used, and inert gas is used for cutting cotton, paper and other flammable materials. The auxiliary vapor entering the nozzle can also cool the focus lens, prevent smoke from entering the lens base to pollute the lens and cause the lens to overheat.

                          數控機床手持式激光切割機在激光切割時激光切割速率的挑選我覺得也很關鍵,最佳激光切割速率范疇可依照機器設備表明選中或用實驗來明確,因為原材料的薄厚度,材料不一樣,溶點高矮,導熱系數尺寸及其熔融后的界面張力等要素,激光切割速率也相對的變

                          In my opinion, the selection of laser cutting rate of CNC machine tool hand-held laser cutting machine is also very important. The best range of laser cutting rate can be determined according to the selection of machine and equipment or by experiments. Because of the thin thickness of raw materials, different materials, high and low melting point, thermal conductivity size and interface tension after melting, the laser cutting rate also changes relatively.

                          便攜式數控切割機主要表現:

                          The main features of the portable CNC cutting machine are as follows:

                          切割速度適度地提高能改善切口質量,即切口略有變窄,切口表面更平整,同時可減小變形。

                          The quality of the incision can be improved by increasing the cutting speed moderately, that is to say, the incision becomes narrower slightly, the surface of the incision is smoother, and the deformation can be reduced at the same time.

                          切割速度過快使得切割的線能量低于所需的量值,切縫中射流不能快速將熔化的切割熔體立即吹掉而形成較大的后拖量,伴隨著切口掛渣,切口表面質量下降。

                          The cutting speed is too fast to make the cutting linear energy lower than the required value. The jet in the cutting seam can not blow off the molten cutting melt immediately and form a large amount of drag. Along with the slag hanging on the incision, the surface quality of the incision decreases.

                          當激光切割速率太低時,因為激光切割處是低溫等離子弧的陽極氧化,以便保持電孤本身的平穩,陽極氧化黑斑或陽極氧化區必定要在離電孤較近的割縫周邊尋找傳導電流地區,另外會向水射流的軸向傳送大量的發熱量,因此使切口變寬,切口兩側熔融的材料在底緣聚集并凝固,形成不易清理的掛渣,而且切口上緣因加熱熔化過多而形成圓角。

                          When the laser cutting speed is too low, because the laser cutting place is anodized by low-temperature plasma arc, in order to maintain the stability of the arc itself, the black spot of anodizing or anodizing area must look for the conductive current area around the slit near the arc, in addition, it will send a large amount of heat to the axial direction of the water jet, so that the incision is widened, and the melted materials on both sides of the incision are at the bottom. The edge agglomerates and solidifies to form the slag which is not easy to clean, and the upper edge of the incision is filleted due to too much heating and melting.

                          當速度極低時,由于切口過寬,電弧甚至會熄滅。由此可見,良好的切割質量與切割速度是分不開的。

                          When the speed is very low, the arc will even go out because the incision is too wide. Thus, good cutting quality and cutting speed are inseparable.

                          左右就是有關手持式激光切割機激光切割速度實際效果聯絡詳細介紹,若有疑惑或者不同見解,熱烈歡迎撥通詳聊。

                          About is about hand-held laser cutting machine laser cutting speed actual effect contact detailed introduction, if there are doubts or different views, warmly welcome to dial detailed chat.



                            濟南卓然天成是大型數控火焰切割機廠家,數控等離子切割機廠家,便攜式數控切割機廠家www.labobinedelisette.com,供應河北數控火焰切割機,山西數控等離子切割機,遼寧便攜式數控切割機,吉林數控火焰切割機,黑龍江數控等離子切割機,江蘇數控切割機,浙江數控切割機,安徽數控切割機,福建切割機,江西切割機,山東數控切割機,臺灣切割機,河南切割機,湖北數控切割機,湖南數控切割機,廣東切割機,海南數控切割機,四川數控切割機,貴州數控切割機,云南切割機,陜西切割機,甘肅數控切割機,青海數控切割機,需要的朋友聯系我們15254176866

                          電話咨詢
                          郵件咨詢
                          在線地圖
                          QQ客服
                          網站地圖 好多水好爽小荡货好紧好热